How To Clean Bad Gas Out Of A Lawnmower

Jupiterimages/Photos.com/Getty Images

Leaving gas in your push lawn mower too long can cause the gas to go bad. Once this happens, the lawn mower will non start. Yous must drain the unabridged fuel system to get the mower support and running. After the mowing season, ever bleed the gasoline from the fuel organization or use a fuel stabilizer to keep the gas fresh for up to a year. This procedure will accept 15 minutes to complete.

Prepare the push mower on a difficult, level surface. Locate the carburetor on the left side of the engine, directly under the air filter. Slide an oil pan nether the carburetor to catch the gasoline. Slide the hose clamp on the fuel line away from the carburetor with needle-nose pliers.

Leaving gas in your push lawn mower as well long can cause the gas to go bad.
Slide the hose clamp on the fuel line away from the carburetor with needle-nose pliers.

Pull the fuel line off the carburetor and aim the fuel line at the oil pan. Allow the gas to drain completely into the pan. Remove the bolt from the bottom of the carburetor with the crescent wrench and slide the basin off the carburetor. Clean out the carburetor bowl by spraying with carburetor cleaner and and then wiping make clean with a rag. Spray the carburetor cleaner into the exposed jet that the bolt screws into that holds the bowl against the carburetor.

Place the bowl back into position and tighten the bolt with the crescent wrench. Button the fuel line back onto the carburetor and slide the hose clamp dorsum toward the carburetor.

Pull the fuel line off the carburetor and aim the fuel line at the oil pan.

Fill the gas tank with fresh gas. Remove the air-filter cover and slide out the air filter. Spray a small-scale corporeality of carburetor cleaner into the top of the air-filter holder; this volition aid in the engine starting in example whatever stale gas remains in the carburetor.

Start the engine and allow to run for several minutes until the engine runs smoothly.