How Can A Technician Boot A Pc Directly To A Network To Receive Windows Pe From A Deployment Server?

Introducing PXE Kick

Usually, when a computer fails to boot, the method to resolve this is using a bootable CD, DVD or USB memory stick, which may comprise a Linux based boot prototype or a Windows PE boot image. When we need to install or run software on too many computers, for instance, there are 100 computers that demand to have system installed or run on, it becomes impractical and very time consuming to practice this machine by machine. In this case, there also be machines that do not have a CD drive or cannot boot from a USB device.

What is the easiest way to solve this problem?

In such a scenario, the AOMEI PXE Kick Tool tin can provide the solution. The simply thing you should do is to run the AOMEI PXE Boot Tool on 1 computer (maybe a server) within the LAN, and kicking other computers (some clients or target computers) on the network.

About AOMEI PXE Kick Tool

The AOMEI PXE Boot Tool can boot many computers on the network from a centralized boot prototype held on the designated server auto. Broadly speaking, Y'all tin create a Windows PE boot image using AOMEI PE Builder software or with a third party tool, too, yous tin can easily create a bootable Linux image or Windows PE image file with the tool provided within AOMEI Backupper.

Y'all can use the AOMEI PXE Kicking Tool and make other clients or target computers kicking from these images. After booting, you can backup, restore or maintain the client machines with tools offered with the prototype file.

IMPORTANT COMPATIBILITY NOTES

To use a PXE boot, each client computer must have:

one. A network bill of fare (NIC) capable of "Wake on LAN" manner.

2. The network carte must support PXE booting.

iii. A wired Ethernet connexion to the network (WI-Fi wireless networking is non supported).

The Advantages of the AOMEI PXE Boot Tool

Comparing with other PXE tools standard features, AOMEI PXE Boot Tool offers additional useful features:

The AOMEI PXE Boot Tool tin can direct create a Linux bootable ISO or Windows PE bootable ISO image file. Alternatively, you can create a bootable ISO file past using the AOMEI Backupper -> Utilities -> Create Bootable Media pick.
If you want to use powerful Windows PE image with desktop, you lot can create an ISO file with AOMEI PE Architect, which is freeware offered by AOMEI, and then, you lot can use it with AOMEI PXE Boot Tool.
You lot don't demand to deploy other plug-ins or programs. Just install AOMEI Backupper and you have access to this powerful network administration characteristic

How to use the AOMEI PXE Kick Tool

Start AOMEI PXE Kick Service

Stride ane. Install AOMEI Backupper on a server or PC that can boot normally. Select "Tools" and then select "AOMEI PXE Kick Tool".

Step 2. Choose the one of the Preboot Execute Environment to start your PC.

Three Options:

Boot from AOMEI Windows system: This is a recommended option, and then the tool helps you lot to easily create a Windows PE system image for network boot.
Boot from AOMEI Linux organisation: This option can exist useful for booting older or Linux based computers on the network.
Boot from a custom prototype file: Y'all can load the special micro-system created by AOMEI PE Builder or Bart PE.

Stride three. After clicking "Offset Service", the AOMEI PXE Boot Tool will configure related data automatically and first the service to wait for target computers.

Setting Clients inside LAN for Network Boot

Set client computers inside LAN for network kick.

Power on the client computer while repeatedly pressing the required key to enter the reckoner's BIOS (usually, the F2 or Del keys, just this depends on the PC manufacturer, so please bank check the documentation if needed), then enable "Network Boot" in the BIOS setting. If your computer is UEFI compatible, please brand sure legacy boot mode is enabled.

Restart the client computer and enter the BIOS/UEFI screen in the same way equally described higher up.

The following steps describe how to configure PXE network kick.

Boot mode choice
Click Bios Features -> CSM Back up -> Boot Manner Pick, and press Enter in "Kicking Fashion Selection" and a pop-up window volition announced, and yous should choose "UEFI and Legacy" or "Legacy Just".

Enable the PXE boot option
Choose "LAN PXE Boot Pick ROM" with down arrow, and turn its status from "Disabled" to "Enabled".

Set the PXE choice as the first boot device
You can select "Kicking Option # ane" in "Kicking Selection Priorities", then select "Realtek PXE B02 D00" too as press Enter.

Alternative to setting the first kicking device
You can also reboot the estimator and hit a key (may be F12 or F11), then a window will pop-upward below, and then select the starting time boot device: "Realtek PXE B02 D00" and printing Enter.

Finally, you tin see the post-obit screenshot, this ways your calculator is booting from PXE over the network. Yous may need to await for a few minutes depending on the speed of the network and the size of the bootable paradigm file.

Tips:

It may take a few minutes for the PXE boot process to complete.
All computers requiring PXE kicking must be on the same network.
If there are many computers using PXE boot, the network speed may be impacted. Information technology may be advisable to dissever the PXE boot clients into smaller groups to heave network performance.
The AOMEI PXE Kicking Tool can support booting UEFI machines currently merely but the WIM file can be used for UEFI (not the ISO file). If the file is an ISO file, then it is suggested the estimator boot manner is changed to "Legacy Boot Manner".
The AOMEI PXE Tool contains a DHCP server that can be used if an existing DHCP server is not available. DHCP is commonly offered by the LAN router.